MNSD300TBA-RS RedStone Blue Flame Vent-Free Gas Wall Heater

MNSD300TBA-RS is a blue-flame RedStone-series wall heater from ProCom that features dual-fuel technology. This vent-free wall heater can be configured for either natural gas or liquid propane. With either fuel type, the MNSD300TBA-RS has a BTU output of 30,000.

The MNSD300TBA-RS has a piezo ignitor with a bush-button start. The ignitor's button is located on the top of the heater's cabinet, next to the OFF/PILOT control knob.

This vent-free wall heater can be configured by a qualified installer for either natural gas or liquid propane. The MNSD300TBA-RS is configured by default for liquid propane by the manufacturer.

Specifications of the MNSD300TBA-RS

Please note that the some specifications for the MNSD300TBA-RS may change depending on the heater's fuel type. The numbers for both natural gas and liquid propane are provided below.

• BTU Output: 30,000 BTU
• Ignition Type: Electric Piezo
• Gas Type: Natural Gas or Liquid Propane
• Voltage Requirements for Blower Kit*: 120 VAC 60 Hz

• Pressure Regulator Setting: 4 in. W.C (NG) / 9 in. W.C (LPG)
• Maximum Inlet Gas Pressure: 9 in. (NG) / 14 in. (LPG)
• Minimum Inlet Gas Pressure: 5 in. (NG) / 11 in. (LPG)

• Height: 23 ¹/₂ in.
• Width: 26 ⁵/₈ in.
• Depth: 8 in.
• Weight: 31 lbs.

*This blower fan kit is an optional accessory that is not included with the MNSD300TBA-RS by default. The voltage requirements listed are only if the PF06-YJLF-B fan kit is installed.